Linear technology and actuators

>
Products
>
Linear technology and actuators

Linear servo actuators

GTX

High capacity roller screw
Continous force up to 15,4 kN cont.
450 mm stroke - 1100 mm/s

GSX

High capacity roller screw - highest forces
Continous force up to 51,2 kN cont.
450 mm stroke - 950 mm/s

Tritex TDX

Embedded servo drive 24/48Vdc
Continous force up to 3,8 kN
450 mm stroke - 846 mm/s

Tritex T2X

Embedded servo drive 230Vac
Continuous force up to 14,3 kN
450 mm stroke - 953 mm/s

RCP6-RRA

24V stepper - absolute encoder
Payload 5-100 kg - ball screw spindle
700 mm stroke - 1120 mm/s

RCP6-RA

24V stepper - absolute encoder
Payload 6-100 kg - ball screw spindle
300 mm stroke - 860 mm/s - low cost

RCP6-WRA

24V stepper - absolute encoder
Payload 4-100 kg - ball screw spindle
800 mm stroke - 800 mm/s

RCS4-RRA

230V servo - absolute encoder
Payload 8-100 kg - ball screw spindle
700 mm stroke - 1500 mm/s

RCS4-RA

230V servo - absolute encoder
Payload 8-100 kg - ball screw spindle
300 mm stroke - 1200 mm/s - low cost

RCS4-WRA

230V servo - absolute encoder
Payload 5-100 kg - ball screw spindle
800 mm stroke - 1300 mm/s

ERC3-R

24V stepper with controller
Payload 12-70 kg - ball screw spindle
300 mm stroke - 800 mm/s

ServoPress RCS2-3-R

230V servo actuator with Load Cell
Max push force 200N-50kN
520 mm stroke - 240 mm/s

RCP5W-RA

24V stepper - absolute encoder - IP67
Payload 20-240 kg - ball screw spindle
800 mm stroke - 560 mm/s

RCD-R

24V dc-brushless motor
Payload 0,7kg – 2,5W - lead screw
10-30 mm stroke - 300 mm/s

RC-mini

stepper or servomotor
very compact
alternative to pneumatics

RC-CRW-mini

stepper or servomotor
very compact - cleanroom
alternative to pneumatics

Mechanical roller screw actuators

KX

Roller screw actuator up to 15,6 kN
Including motor adapter and coupling
150-900 mm stroke - 833 mm/s

FTX

Roller screw actuator up to 178 kN
Including motor adapter and coupling
150-900 mm stroke - 1500 mm/s

FTP

Roller screw actuator for pressing 355 kN
Including motor adapter and coupling
150-300-600 mm stroke - 350 mm/s

Screw jacks

SHE

Lifting screw jack, axial or rotating screw
Lifting capacities of 5 to 2.000 kN
Ingoing speed up to 1500 min-1

MERKUR

Lifting screw jack, axial or rotating screw
Lifting capacities of 2,5 to 500 kN
Ingoing speed up to 1500 min-1

HSE

Worm gear screw jack, axial or rotating screw
Lifting capacities of 5 to 1,000 kN
For higher speeds up to 3000 min-1

SHG

Lifting screw jack, with spiral toothed bevel gear
Lifting capacities of 15 to 90 kN
Ingoing speed up to 3000 min-1

SSP

Stainless steel worm gear screw jack
Lifting capacities of 30 to 250 kN
Ingoing speed up to 1500 min-1

Linear servo motors

HL

Direct drive linear servomotor
Continuous forces 65 - 150 N
Stroke 150 - 450 mm

HN

Direct drive linear servomotor
Continuous forces 65 - 500 N
Stroke 150 - 450 mm

AJM

Iron core direct drive linear servo motor
Continuous forces 68 – 447 N
Hall-sensors - low cogging

AQM

Iron core direct drive linear servo motor
Continuous forces 203 – 405 N
Hall-sensors - cost effictie - low cogging

AKM

Iron core direct drive linear servo motor
Continuous forces 188 – 9274 N
Hall-sensors - low cogging - high force

AUM

Ironless direct drive linear servo motor
Continuous forces 3 – 884 N
Hall-sensors - no cogging

AWM

Ironless direct drive linear servo motor
Continuous forces 5 - 415N
Vacuum compatible - cogging free

ACR

Ironless direct drive curve servo motor
Continuous torques 24 - 460Nm
Hall sensors - cogging free

Voice coil motors

AVM

Direct drive voice coil motor
Continuous forces 1 - 1111 N
Circular desing (Ø12-250 mm)

AVA

Direct drive voice coil motor
Continuous forces 3 - 26N
Flat rectangular desing

ATA

Moving magnet two positions motor
Continues force: 0,4N
Stroke 5 or 10 mm

Linear units with carriage

RCP6-SA

24V stepper - absolute encoder
Payload 7-80 kg - ball screw spindle
1100 mm stroke - 1440 mm/s

RCP6-WSA

24V stepper - absolute encoder
Payload 4-100 kg - ball screw spindle
1100 mm stroke - 840 mm/s

RCP6-TA

24V stepper – arm model
Payload 1-30 kg - ball screw spindle
390 mm stroke - 1120 mm/s

RCS4-SA

230V servo - absolute encoder
Payload 8-90 kg - ball screw spindle
1100 mm stroke - 2200 mm/s

RCS4-WSA

230V servo - absolute encoder
Payload 5-100 kg - ball screw spindle
1100 mm stroke - 1800 mm/s

RCS4-TA

230V servo – arm model
Payload 4-15 kg - ball screw spindle
390 mm stroke - 1300 mm/s

ISB

230V servo, optional cleanroom
Payload 13-120 kg - ball screw spindle
2500 mm stroke - 2500 mm/s

RCP4W-S

24V stepper - encoder - IP65
Payload 5-20 kg - ball screw spindle
700 mm stroke - 530 mm/s

ERC3-S

24V stepper with controller
Payload 6,5-55 kg - ball screw spindle
800 mm stroke - 1200 mm/s

EC-S

24V stepper motor with controller (2 positions)
Load 51 kg - alternative to pneumatics
500 mm stroke - 860 mm/s - incl. guide

NS

230V servomotor - rotating nut
Payload 15-80 kg - ball screw spindle
3000 mm stroke - 2400 mm/s

W-serie

Toothed belt / PU3M-5M
Width profile 40-60 mm
Max. stroke 2000 mm / load 3-35kg

H-serie

Toothed belt / PU-5M
Width profile 80 mm
Max. stroke 2000 mm / load 50kg

L-serie

Toothed belt / PU3M-5M - long slider
Width profile 45-80 mm
Max. stroke 2000 mm / load 15-60kg

Z-serie

Toothed belt / PU3M-5M - driven slider
Width profile 45-80 mm
Max. stroke 2000 mm / load 15-50kg

T-serie

Toothed belt / PU3M - push cylinder
Width profile 40 mm
Max. stroke 400 mm / load 3-5kg

TX-serie

Toothed belt / PU3M - linear and rotation
Width profile 40 mm
Max. stroke 400 mm / load 3-5kg

S-serie

Ballscrew spindle / lead 2.5 mm
Width profile 35 mm
Max. stroke 330 mm / load 3-5kg

Beta-S

Ballscrew spindle / Ø 12-50 mm
Width profile 40-180 mm
Max. stroke 5260 mm / load 15-1500kg

Beta-Z

Toothed belt / 16AT5-75AT10
Width profile 40-180 mm
Max. stroke 7710 mm / load 15-1500kg

Beta-A

Toothed belt – driven carriage
Width profile 50-180 mm
Max. troke 7770 mm / load 60-1200kg

Delta-S

Ballscrew spindle/ Ø 12-32 mm
Width profile 90-240 mm / compact height
Max. stroke 5400 mm / load 100-1200kg

Delta-Z

Toothed belt / 32AT5-60ATL10
Width profile 90-240 mm / compact height
Max. stroke 7340 mm / load 100-1200kg

HN

Direct drive linear servomotor
Continuous forces 65 - 500 N
Stroke 150 - 450 mm

DGL

Direct drive motor with double guide
Continuous forces 22 – 460 N
Stroke 200-3000mm / encoder 5.0-0.1µ

VPL

Vertical pick and place linear motor
Moving mass: 0,5 - 5kg
Stroke 30-60mm / encoder 1.0-0.1µ

XRL

Direct drive linear motor with cross roller guide
Continuous forces 57 – 85 N
Stroke 150-200mm / encoder 1.0-0.005µ

Rack and pinion drives

ZTRS

PH with pionion and bearing support
Module 2 -10 / max 3,9 m/s
Acceleration feed force 15 – 126 kN

ZTR

PH and KS gear with pionion
Module 2 -8 / max 4,4 m/s
Acceleration feed force 3,8 - 70 kN

ZR

PH and KS gear with pionion
Module 2 -4 / max 6,7 m/s
Acceleration feed force 1,7 - 13 kN

ZV

PE-P-PA-PK-PKX-KS-KL-K with pionion
Module 2 -4
Acceleration feed force 5 - 17 kN

UHPR-HPR-PR

Racks in combination with Stöber servo gears
Module 2 - 12 / length until 2000 mm
Quality 3, 5, 6, 7 and 8

Electro mechanical actuators

EC-mini

24V stepper motor with controller (2 positions)
Load 8 kg - alternative to pneumatics
30 or 50 mm stroke - 300 mm/s

EC-R

24V stepper motor with controller (2 positions)
Load 80 kg - alternative to pneumatics
300 mm stroke - 860 mm/s

EC-RR

24V stepper motor with controller (2 positions)
Load 80 kg - alternative to pneumatics
300 mm stroke - 860 mm/s - incl. guide

EC-RW

24V stepper motor with controller (2 positions)
Load 80 kg - alternative to pneumatics
300 mm stroke - 860 mm/s - IP67

EC-S

24V stepper motor with controller (2 positions)
Load 51 kg - alternative to pneumatics
500 mm stroke - 860 mm/s - incl. guide

MS

Electro mechanical actuators
Pulling and pressing force 50 – 1600 kN
Stroke up to 6000 mm

ELA

Trapezoidal spindle or ball screw spindle
Lifting forces 2 to 10 kN
Stroke 100 to 800 mm

ALS/ALSR

Axial bearing system, open or closed
Lifting forces up to 100 kN
Input speed up to 1500 min-1

HLA

High performance linear actuator
Lifting capacities up to 100 kN
Trapezoidal or ball screw

Lifting columns

PHOENIX

LIfting column in closed design
Lifting capacities of 5 to 25 kN.
Speeds of 5 - 40 mm/s

Combination bearings

Standard 4.053...

Standaard combination bearing
Diameters 52,5 - 149 mm
Optional with mounting plate

Eccentric 4.454...

Adjustable with eccentric shaft
Diameter 62,5 - 149 mm
Optional with mounting plate

Adjustable 4.072...

Adjustable with shims
Diameters 62 - 149 mm
Optional with mounting plate

Jumbo 4.089...

Adjustable with eccentric shaft
Diameters 165 - 390 mm
Optional with mounting plate

Radial 2.2062...

Radial roller bearing
Diameter 62 - 149 mm
Optional with mounting plate

AP

Mounting plate for Faro bearing
Welded on request
Special dimensions on demand

Lift mast profiles

U profile Std 0-6

U profile for Faro bearing
Cut to size up to ca 12 m
Blasted on request

Linear tables

Alpha-S

Ballscrew spindle / Ø 20-40 mm
Width table 155-455 mm
Max.stroke 2540 mm/load 2000-120000kg

XYZ cartesian systems

TTA

230V XYZ table top, optional rotation
Max payload 30 kg
Max reach 500 x 500 x 150 mm

IK2-P6

24V stepper - XY/XZ system
Max payload 17 kg
Max reach 1100 x 500 mm

IK3-P6

24V stepper - XYZ system
Max payload 6 kg
Max reach 1100 x 500 x 300 mm

IK2-S2

230V servo - XY/XZ system
Max payload 24 kg
Max reach 1000 x 400 mm

IK3-S2

230V servo - XYZ system
Max payload 12 kg
Max reach 1000x400x200 mm

ICSB2

230V servo - XY or XZ system
Max payload 65 kg
Max reach 2500 x 700 mm

ICSB2-G

230V servo - XY-gantry system
Max payload 45 kg
Max reach 2500 x 1000 mm

ICSB3

230V servo - XYZ system
Max payload 33 kg
Max reach 2500 x 700 x 500 mm

ICSB3-G

230V servo - XYZ-gantry system
Max payload 31 kg
Max reach 2500 x 1200 x 500 mm

ICSPA-BN

230V servo - multiple XYZ system
Max payload 40 kg
Max reach 2250 x 700 x 500 mm

XYZ (CCM)

XY, XZ and XYZ systems
Assembly of CCM linear units
Flexible and modular structure

Accessoires (CCM)

Self-assembly XY, YZ, XYZ systems
Assembly CCM linear units
Motor adapters and couplings

XYZ (HSB)

XY, XZ and XYZ systems
Assembly of Beta and Delta modules
Custom design

Gantry (HSB)

XY, XZ gantry
Assembly of Gamma and Sigma modules
Custom design

Gantry robot drives

Gamma-Z

Toothed belt / 32AT5-75ATS15
Width profile 90-280 mm
Max.stroke 11520 mm / load 300-3000kg

Gamma-ZD

Double toothed belt and carriage
Width profile 90-280 mm
Max. stroke 11200 mm / load 300-3000kg

Gamma-AS

Toothed belt – driven carriage
Width profile 90-220 mm
Max. stroke 11380 mm / load 300-2000kg

Gamma-AZ

Rack and pinion / Module 2 and 3
Width profile 90-280 mm
Max. stroke 11320 mm / load 300-2500kg

Sigma-Z

Toothed belt / 32AT5-50AT10
Width profile 90-160 mm
Max. stroke 7760 mm / load 250-600kg

Sigma-A

Toothed belt – driven carriage
Width profile 90-160 mm
Max. stroke 7745 mm / load 250-600kg

Voice coil modules

XMGV

Voice coil with rail guide and encoder
Continuous forces 5 – 74N
Stroke 15-30mm / encoder 1.0-0.005µ

TGV

Thru hole voice coil with cross roller
Continuous forces 5 – 162N
Stroke 4-8mm / encoder 1.0-0.005µ

XRV

Voice coil stage with cross roller guide
Continuous forces 3 – 18N
Stroke 20mm / encoder 1.0-0.005µ

DGV

Double guide voice coil stage
Continuous forces 4 – 18N
Stroke 10-20mm / encoder 1.0-0.5µ

AZT

Vertical-theta voice coil stage
Continuous force/torque 4N – 9,1 mNm
Stroke 10mm – 360 degrees

Splines

SCN

Tooth width: 3-8 mm
6 or 8 teeth
Steel or stainless steel

BS

Tooth width: 3-8 mm
Length: 40-75 mm / 6 or 8 teeth
Steel or stainless steel

Quick response, short lines
Renowned manufacturers
Profound product knowledge
High reliability

We are active in many markets

Various applications in the Benelux, from handling systems to tooling machines or the automotive to food processing industry.

Applications

ATB Automation – specialist in power transmission and motion control

We supply slewing ring bearings, oscillating mountings, tensioner devices from stock and we also have spiral bevel gearboxes, servo gears and electromechanical actuators in our delivery program.

In addition we also select and offer the right components and systems for motion control solutions, such as servo gear motors, linear servo actuators and complete XYZ cartesian systems.

Latest tweets: ATB Automation

@ATBAutomation

Bönnekamp GR-serie gaffels met roterende as, veelal direct uit voorraad leverbaar! bit.ly/3rBeOWt #Bönnekamp #gaffel #roterende as #rotatie

@ATBAutomation

Stagiair Louk ontwerpt een bedieningsprogramma voor onze 4D robot, lees hier meer: bit.ly/3oh4CRp. #Robot #ontwerp #bedieningsprogramma

Linear technology and actuators

Select (Click for filters)

Product group

Brand

Search

GTX

GSX

Tritex TDX

Tritex T2X

RCP6-RRA

RCP6-RA

RCP6-WRA

RCS4-RRA

RCS4-RA

RCS4-WRA

ERC3-R

ServoPress RCS2-3-R

RCP5W-RA

RCD-R

RC-mini

RC-CRW-mini

KX

FTX

FTP

SHE

MERKUR

HSE

SHG

SSP

HL

HN

AJM

AQM

AKM

AUM

AWM

ACR

AVM

AVA

ATA

RCP6-SA

RCP6-WSA

RCP6-TA

RCS4-SA

RCS4-WSA

RCS4-TA

ISB

RCP4W-S

ERC3-S

EC-S

NS

W-serie

H-serie

L-serie

Z-serie

T-serie

TX-serie

S-serie

Beta-S

Beta-Z

Beta-A

Delta-S

Delta-Z

HN

DGL

VPL

XRL

ZTRS

ZTR

ZR

ZV

UHPR-HPR-PR

EC-mini

EC-R

EC-RR

EC-RW

EC-S

MS

ELA

ALS/ALSR