Trio Motion Technology 8-ANALOGUE OUT / P378
I/O module / Gateway
- Flexslice system / EtherCAT
- 8 Analogue Outputs (12 bits)
- Expansion via EtherCAT Coupler
The Flexslice 8 analog output module has eight programmable voltage range outputs, each with a resolution of 12 bit. The 8 single-sided outputs have a common 0V potential and are fed to a single push-in connector.
The EtherCAT Flexslice System is designed for fast, flexible expansion of motion applications and can be used with Trio or 3rd Party EtherCAT Masters. The Coupler is connected to the network via the top Ethernet interface. The bottom RJ45 socket can be used to connect other EtherCAT devices on the same line.
The EtherCAT Coupler supports up to 16 input / output modules (maximum 8 Flex Analogue IO modules) with a positive mechanical interlock and bus connector, allowing a reliable EBUS connection through the backplane. The complete assembly can be mounted on DIN rail. The link converts the passing telegrams from the Ethernet 100BASE-T to the EBUS signal format.
In the EtherCAT network, the Coupler can be installed at any position in the Ethernet line, making it suitable for use near the master or remotely.
The Flexslice input / output modules from Trio provide a robust, fast and flexible solution for both motion control and general automation. EtherCAT cycle times of up to 125μsec are supported and the bus coupler uses EBUS technology to bring all submodules onto the EtherCAT network without sacrificing performance.
EtherCAT slave nodes (Flexslice modules) are connected via the Flexslice EBUS and the EtherCAT connector. Total number of slave nodes can be up to 128 including I / O and more complex devices.
- P366 Flexslice Coupler
- P371 Flexslice 16-Out PNP
- P372 Flexslice 16-In PNP
- P362 Flexslice Power Connect
- P367 Flexslice Thermocouple
- P372 Flexslice Analogue 2 Servo Axes
- P375 Flexslice Flex 3-Axis
- P378 Flexslice 8 Analogue Outputs
- P379 Flexslice 8 Analogue Inputs
Specifications Flexslice 8 Analog Outputs P378: