Exlar GSM
Linear servo actuator

Laser welding installation with Exlar roller screw servo actuators

Fully automatic laser welding installation for Pillow Plate heat exchangers. Plate thickness combinations (upper/lower plate): 0.8/0.8 to 2/20 mm.

Two plates are clamped against each other with two Exlar roller screw servoactuators with a clamping force up to 15 kN. The two servoactuators run synchronous in the servo controller.

Dosing syrup waffles with Exlar actuator

Flexible dosing of syrup with 10 pieces Exlar roller screw servo actuators. Maintenance-free replacement of pneumatic cylinders.

Welding manipulator with Exlar, Torriani and Stöber drive

Positioning heavy steel tubes up to 2 tons with manual control in any desired angle and height through five moveable axis. The five moveable axes provide a tilting motion, a rotary movement, an ingoing and outgoing sliding movement and a lifting movement.

Belt treadmill with Exlar servoactuators

This belt threadmill is a dual belt treadmill with fully separated 3D force measurement capabilities and unique movement capabilities (Instrumented treadmill). It features very high acceleration and deceleration of the individual belts (unloaded 20 m/s2), optional pitch motion from 10 degrees backward to 10 degrees forward in less than 1 second and an optional sway motion of 100 mm from left to right in less than a second.
The reaction of the patient to disturbances is of interest to the analysis. The Exlar GSM40 creates a 'pitch' movement; the front and rearward tilting of the band.
The Exlar GSM30 regulates the 'sway' movement; a linear motion with a maximum stroke of 50 mm to the left or to the right.