Bönnekamp SI
Rod end galvanised or stainless steel
- Female thread: M5x0.8 - M48x2.0
- Maintenance free - innerring brass/PTFE
- Galvanized steel or stainless steel
Rod End with internal thread from M5x0.8 to M48 x 2,0
Available in different sizes:
- SI - Galvanized with bronze PTFE inlay: Suitable for dynamic loads and low speed
- SSI - Stainless steel Teflon: For eg food and pharmaceutical industry universal (normal load) 100% stainless steel
Material and surface treatments:
- Body: medium carbon steel 45, zinc plating; Steel ball: bearing steel GCr15 without chromium plating; Inner ring: brass H62, with PTFE;
- Body: stainless steel 304 or stainless steel 316.
Steel ball: alternative bearing steel GCr15 with hard chrome plating or stainless steel 440C; Inner ring: alternative low carbon steel 20 or stainless steel 304.
Webguiding press paper with Exlar actuator and Bönnekamp rod end
The position of the paper on the roll is measured with sensors and constantly controlled by the Exlar Tritex servo actutator. The Tritex actuator is equipped with an integrated controller with an analog input to which the signal from the sensor is connected. With the standard process control application in the software, the Tritex system is very easy to set up.
In spite of the constant control at 24-hour operation, the service life of the actuator is ensured by the roller-screw spindle in the Exlar actuator.
Cardio equipment with Bönnekamp rod ends
Maintenance-free Bönnekamp rod ends made of galvanized steel with brass inner ring used in cardio machines.
Belt sander with Exlar servo actuator and Bönnekamp rod end
A belt sander is used for the production of 'High Voltage Cables'. In the belt sander the insulating sheaths of high-voltage cables with a diameter of Ø20 to Ø55mm are highlighted. The sanders and the main shaft rotate while the cable is being fed. The Exlar servo actuator with Bönnekamp rod head ensures the linear displacement in which the control unit is integrated on the Exlar servo actuator.
More information about the customer and the application can be read here.
NL
FR
EN
