Leadshine ELM 40-60-80
Brushless ac-servo motor with 23 bits encoder
- Ac-servo motor 100W - 1 kW / 40-60-80 mm
- Stall torque 0,3 to 3,2 Nm
- 230/400Vac / rated Speeds up to 3000 rpm
Compact brushless ac servo motors equipped with a 23-bit magnetic or optical absolute encoder, optionally with fail-safe brake.
The encoder cable is optionally available with battery for multi-turn absolute positioning, eliminating the need for homing procedures.
The following types are available:
- ELM1H-MA: 50 to 1000W - 230Vac - magnetic absolute encoder (ATB Automation code: 24.01.10.33xx)
- ELM2H-LA: 50 to 1000W - 230Vac - optical absolute encoder (ATB Automation code: 24.01.10.34xx)
- ELM2L-LA: 50 to 750W - 230Vac - low inertia - optical absolute encoder (ATB Automation code: 24.01.10.34xx)
- ELM2H-LA-T: 750 to 1000W - 400Vac - optical absolute encoder (ATB Automation code: 24.01.11.10xx)
The ELM series are supplied in combination with the ELP, EL6, EL7 or EL8 servo drives.
Compact IP67 connectors.
Palletizer with Trio Motion Controller, Leadshine servo and Stöber gears
Flexible programmable 4-axis palletizer robot. Heart in this application is the Trio Motion Controller where the 4 axis robot with 4 Leadshine servo drives is controlled via a coordinate transformation. The fast EtherCAT connection between the Trio MC4N-ECAT controller and the drives ensures accurate and simple communication. In addition to the Trio Motion Controller, mechanical components are also used, such as a slewing ring bearing for the rotation movement and a rack and pinion for the horizontal movement. Each servo shaft is equipped with a Stöber planetary gearbox or angle worm gearbox.
Advantages of solution
- Cost effective products of Leadshine and Trio Motion Technology
- Reliable and fast commissioning with EtherCAT
- Cost effective installation with EtherCAT bus
- Flexible and easy to programm with Trio Motion Perfect and RPS Kinematics
- Complete package of products by ATB Automation:
- Calculation and selection of the servomotors and gears
- Training and support of the motion controller, HMI and servodrives
Exhibition demo with Leadshine and Wanshsin
Demonstration of LEDGO LED panels at an exhibition. Rotations are realized with three Leadshine servo drives. The main drive is equipped with a 1 kW servo motor and the two arms of a 400W servomotor. The servomotors are equipped with Wanshsin planetary gearheads with slanting teeth, guaranteeing a low noise level.
NL
FR
EN
